filter
Automation, integration and coupling of UAVs calculation workflows using ANSYS ACT
CADFEM CIS, CJSC

Automation, integration and coupling of UAVs calculation workflows using ANSYS ACT

CADFEM CIS R&D team offers a variety of solutions for any automation and integration projects. Whether the project is small or complex, local or international, we are able to meet your needs.

Simulating Processes in Combustion Chambers of Boilers
CADFEM CIS, CJSC

Simulating Processes in Combustion Chambers of Boilers

Simulating processes in combustion chambers is a critical point at the design stage, modernization, as well as in boiler unit operation. Computational simulation helps to estimate and improve boiler performance and fuel burn-up efficiency, lower polluting emissions, forecast slagging areas, etc. Using ANSYS Fluent software along with ANSYS ICEM CFD mesh generator and Design Modeler geometry tool helps to perform numerical analysis of a boiler with complex geometry, taking into account complex physical processes inside.

Optimal design of Nautilus-based dual-usage turbine
CADFEM CIS, CJSC

Optimal design of Nautilus-based dual-usage turbine

The original aerodynamic design of a non-cavitating marine turbine exhibited performance-degrading cavitation in the hub region at high rotation rate. Using a numerical optimization approach, the cavitation was fully eliminated by updating the local geometry of turbine helical blades. Computational outputs were obtained using a combination of ANSYS SpaceClaim, ANSYS CFX and Fluent, ANSYS Simplorer and ANSYS optiSLang software working in the ANSYS Workbench 'end-to-end' environment.

Multiphysics simulations in MEMS piezo inkjet unit design
Infinite Simulation Systems B.V.

Multiphysics simulations in MEMS piezo inkjet unit design

The complex physics in inkjet units is investigated with different simulation types at increasing level of complexity. The analyses types vary from static analyses on the actuator, via modal and harmonic analysis up to transient analysis on a complete unit with all involved physics and appropriate two-way couplings in the modeling.

Robustness Evaluation and Robust Design Optimization (RDO) of Turbo Machinery
Dynardo GmbH

Robustness Evaluation and Robust Design Optimization (RDO) of Turbo Machinery

Increased efficiency by sensitivity analysis and optimization with optiSLang® and ANSYS®.

Blast Furnace Air Pre-Heater Gets a Thermal Boost
ESSS – Engineering Simulation and Scientific Software Ltda.

Blast Furnace Air Pre-Heater Gets a Thermal Boost

Engineers use CFD to improve heat exchanger performance in iron production. Better design understanding using numerical simulations indentified reduced heat transfer areas.

A New Spin on Cement
ESSS – Engineering Simulation and Scientific Software Ltda.

A New Spin on Cement

CFD multiphase simulation broadens understanding of dynamic separators in cement manufacturing.

Between Mixture Theory and Darcy law
ESSS – Engineering Simulation and Scientific Software Ltda.

Between Mixture Theory and Darcy law

Methodologies in reservoir simulations for recovery of oil by water displacement are investigated in a joint work with PETROBRAS, Fluminense Federal University and ESSS.

CFD application in HVAC for design services for buildings, Malls and Airport
Fluid Codes Ltd.

CFD application in HVAC for design services for buildings, Malls and Airport

Applications related to the built environment and HVAC design industries.

Customization of ANSYS Fluent for your application
Process Flow Solution Ltd Oy

Customization of ANSYS Fluent for your application

Evaluation of wind comfort levels around building developments

Evaluation of wind comfort levels around building developments

CFD application for Oil and Gas
Fluid Codes Ltd.

CFD application for Oil and Gas

Numerical simulation of a transcatheter aortic valve
CADFEM (Suisse) AG

Numerical simulation of a transcatheter aortic valve

In a transcatheter percutaneous aortic valve implantation (TAVI), the interaction of blood, stent and aorta are of central importance to determine implants lifetime.

CFD and FE Analysis of a pressure control valve
CADFEM (Suisse) AG

CFD and FE Analysis of a pressure control valve

Our customer Grande Dixence SA is a leading supplier of electrical power and owner of the tallest gravity dam in the world. Several pressure control valves of the hydroelectric power plant had to be inspected in a revision campaign.

High-Enthalpy High-Speed Cavity Flow
Prof. Natalya Fedorova

High-Enthalpy High-Speed Cavity Flow

Jet Injection into Supersonic Flow
Prof. Natalya Fedorova

Jet Injection into Supersonic Flow

The problem of transverse injection of a jet into a supersonic flow is of interest for analyzing the processes that occur in vectored-thrust rocket engines, thruster-controlled flying vehicles and also for the development of hypersonic flying vehicles and their propulsion systems.

ANSYS Workbench shortens development period
EDR&Medeso

ANSYS Workbench shortens development period

Fläkt Woods decided to move the major part of its development work from laboratory scale to computational simulation models. Together with EDR&Medeso, Fläkt Woods implemented the use of ANSYS Workbench software to facilitate for a parametric simulation study of the new product design.

Slag pits hall thermal simulation
MESco

Slag pits hall thermal simulation