filter
Mechanical
Development of Advanced Engineering Solutions

Mechanical

DAES has a large experience in structural analysis. Our experience covers all phases from pre-processing to post-processing in compliance with most common design standards (DIN; RCC, EN, DVS, etc…).

Cleaning up with EKM
ESSS – Engineering Simulation and Scientific Software Ltda.

Cleaning up with EKM

As products become more sophisticated and feature rich, simulation tools and design methodologies are evolving in response.

Customization of ANSYS Fluent for your application
Process Flow Solution Ltd Oy

Customization of ANSYS Fluent for your application

Need a UDF? We have extensive experience of programming user-defined functions for ANSYS Fluent. From custom simulation model development to integration and automation ... we'll do it for you!

Door Slam Analysis
CADFEM GmbH

Door Slam Analysis

Transient Door Slam Analysis - Component Mode Synthesis (CMS) for Large Models

Crash Analysis of an amphibious bus according to the ECE R66 regulations
CADFEM GmbH

Crash Analysis of an amphibious bus according to the ECE R66 regulations

Simulation by order of a bus rollover scenario with LS-DYNA®

FE Analysis of a grinding machine
CADFEM (Suisse) AG

FE Analysis of a grinding machine

The development of new functionalities of existing machine platforms, as well as the conception of innovative machine-tools can be accelerated by reducing the number of prototypes required prior to the final series release to the market. The mechanical behavior of a grinding machine depends to a great extent on the vibration behavior of single components, selected assemblies and the entire machine. The presence of critical eigenfrequencies and modes inside the rotational speed range of the spindle must be avoided to guarantee the precision of the treatment.

Automated mechanical strenght proof for railway vehicles
CADFEM (Suisse) AG

Automated mechanical strenght proof for railway vehicles

Our customer Matériel Industriel SA MATISA is a pioneer in the industrialization of mechanical railway works, designing, engineering and producing, among others, tamping machines. The load on the landing gear of the tamping machines under standardized according to fracture and fatigue loads can be accurately calculated using the finite element method (FEM). Several load cases and load combinations must however be considered.

Blast Vent Panel Explicit Dynamics Analysis

Blast Vent Panel Explicit Dynamics Analysis

IDAC were required to demonstrate how an explicit dynamic analysis could be carried out on a model of a steel vent panel made using pressed steel sections, and being subjected to an internal blast load. ANSYS Explicit STR was used for this purpose.