filter
Simulation of 3D Unsteady Multi-phase Flow of a Siphonic Toilet
Advanced Technology Joint Stock Company

Simulation of 3D Unsteady Multi-phase Flow of a Siphonic Toilet

In order to predict the flush performances of siphonic toilet products before mass production, a numerical simulation for a three-dimensional unsteady multi-phase flow in the flushing process of a wash-down toilet is carried out by using FLUENT software.

Metamodels in a Cyber-Physical System
Dynardo GmbH

Metamodels in a Cyber-Physical System

In order to determine the remaining lifetime of safety relays, simulation models of the whole system are combined with the real data of an operating elementary relay in a cyber-physical system. Phoenix Contact Electronics GmbH applies optiSLang for parameter identification by means of metamodels used as Functional Mockup Units (FMUs).

Parameter Identification for a Hyperelastic Material Model of an Elastomer Rubber Boot
Dynardo GmbH

Parameter Identification for a Hyperelastic Material Model of an Elastomer Rubber Boot

In order to develop a reliable model for a rubber boot of a constant velocity (CV) joint, optiSLang was used for parameter identifi cation and direct optimization to fi t the simulated stress strain curves to the experimental data.

Robust Optimization of Continuously Reinforced Composites in the Motorcycle Industry
Dynardo GmbH

Robust Optimization of Continuously Reinforced Composites in the Motorcycle Industry

At KTM, Statistics on Structures is used for the consideration of scattering production and material parameters to optimize the design phase of light-weight components used in the automotive and motorcycle industry.

Analysis of Low Cycle Fatigue Considering Geometric Manufacturing Tolerances
Dynardo GmbH

Analysis of Low Cycle Fatigue Considering Geometric Manufacturing Tolerances

SIEMENS AG applies ANSYS, Statistics on Structures and optiSLang for probabilistic analyses of geometric variations and their infl uence on the fatigue behavior of a gas turbine housing.

Automation, integration and coupling of UAVs calculation workflows using ANSYS ACT
CADFEM CIS, CJSC

Automation, integration and coupling of UAVs calculation workflows using ANSYS ACT

CADFEM CIS R&D team offers a variety of solutions for any automation and integration projects. Whether the project is small or complex, local or international, we are able to meet your needs.

Comments on the Testing and Management of Plastics Material Data
DatapointLabs, LLC

Comments on the Testing and Management of Plastics Material Data

Plastics appeared as design materials of choice about 30 years ago. Their multi-variable, non-linear nature was not well understood by engineers trained to work in a linear elastic world. We discuss challenges related to processes such as injection molding vs. blow-molding; filled plastics; and modeling for crash applications.

Creating Interactive Techniques and Automated Workplaces
CADFEM CIS, CJSC

Creating Interactive Techniques and Automated Workplaces

Using ANSYS EKM allows to create automated workplaces and interactive techniques on the basis of ANSYS software and other products. An interactive technique is a web-application which works with one or several parametric models. Such environment allows to customize the software interface according to user’s demands.

Simulating Processes in Combustion Chambers of Boilers
CADFEM CIS, CJSC

Simulating Processes in Combustion Chambers of Boilers

Simulating processes in combustion chambers is a critical point at the design stage, modernization, as well as in boiler unit operation. Computational simulation helps to estimate and improve boiler performance and fuel burn-up efficiency, lower polluting emissions, forecast slagging areas, etc.

Optimal design of Nautilus-based dual-usage turbine
CADFEM CIS, CJSC

Optimal design of Nautilus-based dual-usage turbine

The original aerodynamic design of a non-cavitating marine turbine exhibited performance-degrading cavitation in the hub region at high rotation rate. Using a numerical optimization approach, the cavitation was fully eliminated by updating the local geometry of turbine helical blades.

Washing Machine - Varied Calculations Lead to Better Understanding of the System
CADFEM GmbH

Washing Machine - Varied Calculations Lead to Better Understanding of the System

Miele engineers use powerful simulation tools from CADFEM to advance innovations, optimally design components and assembly process, and secure the functions of their many products.

Computational Fluid Dynamics

Computational Fluid Dynamics

Computational Fluid Dynamics is becoming one of the most widely used kind of simulation in industry. However, it remains a challenge to get the right answer.

High-speed XYZ Glue unit - NXP ITEC

High-speed XYZ Glue unit - NXP ITEC

A new technology in the semiconductor industry is to glue IC components to lead frames. To apply the glue accurately a high precision XYZ manipulator is needed.

Vibration isolation (Active/Passive)

Vibration isolation (Active/Passive)

Our main service is to perform projects for our customers. The majority are research and development projects to develop high-end mechatronic systems from concept to prototype.

Cleaning up with EKM
ESSS – Engineering Simulation and Scientific Software Ltda.

Cleaning up with EKM

As products become more sophisticated and feature rich, simulation tools and design methodologies are evolving in response.

Optimization of Hydro Carbon Production in Unconventional Oil and Gas Reservoirs
Dynardo GmbH

Optimization of Hydro Carbon Production in Unconventional Oil and Gas Reservoirs

With an effective 3D hydraulic fracturing simulator, Dynardo provides the software base for the optimization of hydro carbon production with minimal related completion costs.

Dynamic Structural Analysis and Strength Verification of a Thruster
Dynardo GmbH

Dynamic Structural Analysis and Strength Verification of a Thruster

When dealing with random vibrations, a non-linear dynamic analysis with ANSYS® helps to verify the strength of a thruster regarding complex loading conditions.

Simulation of Fire Resistance
Dynardo GmbH

Simulation of Fire Resistance

Development of a realistic simulation model as a basis for the prognosis of material behaviour and the fire resistance of calcium silicate masonry walls.

Model Calibration of a Railway Vehicle
Dynardo GmbH

Model Calibration of a Railway Vehicle

With the help of optiSlang, calibration of a numerical model of an Alfa Pendular train, including the car body, bogies and passenger-seat system, was conducted based on the natural frequencies and modal configurations estimated from dynamic tests.

Robustness Evaluation and Robust Design Optimization (RDO) of Turbo Machinery
Dynardo GmbH

Robustness Evaluation and Robust Design Optimization (RDO) of Turbo Machinery

Increased efficiency by sensitivity analysis and optimization with optiSLang® and ANSYS®.

Diversity of Variations in the Virtual Prototyping of Tennis Rackets
Dynardo GmbH

Diversity of Variations in the Virtual Prototyping of Tennis Rackets

Robustness evaluation and optimization of HEAD tennis rackets with multiple input and objective parameters using optiSLang® and ANSYS®.

Optimization of Crash Relevant Vehicle Structures During the Concept Phase
Dynardo GmbH

Optimization of Crash Relevant Vehicle Structures During the Concept Phase

A reduction in time spent for early phase product development can cut costs significantly. Using Robust Design (RDO) methodology, safety related simulations can be carried out a lot earlier than in conventional processes.

Structural Analysis and Fatigue Assessment of a Subsea Mooring Line Connector

Structural Analysis and Fatigue Assessment of a Subsea Mooring Line Connector

Advanced simulations for the nuclear power industry
Dynardo GmbH

Advanced simulations for the nuclear power industry

Dynardo provides an extensive expertise for the simulation and verification of special load cases like airplane impact or earthquake damage using ANSYS, multiPlas, LS-DYNA and optiSLang.

Optimization and Development of New Antenna Design using HFSS
ESSS – Engineering Simulation and Scientific Software Ltda.

Optimization and Development of New Antenna Design using HFSS

Antenas Pluton uses ANSOFT HFSS for electromagnetic analysis of antennas, achieving a high level of approval and reducing the development lead time of its projects to the highest degree.

A New Spin on Cement
ESSS – Engineering Simulation and Scientific Software Ltda.

A New Spin on Cement

CFD multiphase simulation broadens understanding of dynamic separators in cement manufacturing.

archive