filter
Automation, integration and coupling of UAVs calculation workflows using ANSYS ACT
CADFEM CIS, CJSC

Automation, integration and coupling of UAVs calculation workflows using ANSYS ACT

CADFEM CIS R&D team offers a variety of solutions for any automation and integration projects. Whether the project is small or complex, local or international, we are able to meet your needs.

Creating Interactive Techniques and Automated Workplaces
CADFEM CIS, CJSC

Creating Interactive Techniques and Automated Workplaces

Using ANSYS EKM allows to create automated workplaces and interactive techniques on the basis of ANSYS software and other products. An interactive technique is a web-application which works with one or several parametric models. Such environment allows to customize the software interface according to user’s demands.

Dynamic Structural Analysis and Strength Verification of a Thruster
Dynardo GmbH

Dynamic Structural Analysis and Strength Verification of a Thruster

When dealing with random vibrations, a non-linear dynamic analysis with ANSYS® helps to verify the strength of a thruster regarding complex loading conditions.

A parametric geometry and grid generation tool for aircraft configurations
ESSS – Engineering Simulation and Scientific Software Ltda.

A parametric geometry and grid generation tool for aircraft configurations

Embraer and ESSS have joined forces to develop GMA, a set of pre-processing tools and methods capable of automating the whole geometry and grid generation process for a range of aircraft and component configurations of interest for the aerospace industry, based on a limited number of user defined parameters.

Failure analysis and optimization of an aero engine combustion chamber
Lufthansa Technik AG

Failure analysis and optimization of an aero engine combustion chamber

In order to identify the root cause for severe damages in the combustion chamber, a comprehensive simulation using Ansys CFX has been carried out. The simulation contains all piece parts of the real hardware and shows that the original design of the chamber and the staging of the combustion leads to areas with undesired hot spots. Additionally, a weakness of the cooling concept generates unprotected areas, which are the starting point for oxidation and burnings. The development of a design alteration has also been supported by numerical simulation.

FSI-Simulation of a High Pressure Compressor
Lufthansa Technik AG

FSI-Simulation of a High Pressure Compressor

In order to analyse the stresses of HPC blades for repair purposes, a comprehensive, full detailed simulation of the entire compressor assembly has been carried out.

Acoustic Analysis Software based on Fast Multi-Pole BEM
CYBERNET SYSTEMS Co., Ltd.

Acoustic Analysis Software based on Fast Multi-Pole BEM

WAON can co-exist with ANSYS Acoustic and can work on ANSYS Workbench.

High-Enthalpy High-Speed Cavity Flow
Prof. Natalya Fedorova

High-Enthalpy High-Speed Cavity Flow

Jet Injection into Supersonic Flow
Prof. Natalya Fedorova

Jet Injection into Supersonic Flow

The problem of transverse injection of a jet into a supersonic flow is of interest for analyzing the processes that occur in vectored-thrust rocket engines, thruster-controlled flying vehicles and also for the development of hypersonic flying vehicles and their propulsion systems.